Forum Replies Created
-
Posts
-
If you want to Create a new mail folder in Yahoo Mail on your iPhone is simple. Here’s how to do it:
- Open the Yahoo Mail App: Launch the app and log in if you haven’t already.
- Access Folder Options: Tap the menu icon (three horizontal lines) in the top-left corner to open the sidebar.
- Add a New Folder: Scroll down and tap on “Create New Folder.”
- Name Your Folder: Enter a name for your new folder and tap “Save” or “Done.”
- Your new folder will now appear in the folder list, and you can move emails into it by selecting an email, tapping the three-dot menu, and choosing “Move.”
If you want to change the font in Yahoo Mail, you can do it through few clicks. Here’s how to do it:
- Go to Settings: Open your Yahoo Mail account and click on the gear icon at the top right corner to access “Settings.”
- Choose “More Settings”: In the drop-down menu, select “More Settings.”
- Customize Font: Navigate to “Writing email” from the left panel. Under the “Default rich-text font” section, you’ll find font options. Select your preferred font style, size, and color.
- Save Changes: Once done, click “Save” to apply your settings.
- Now, all your outgoing emails will use your selected font. If you’re composing an email and want to change the font temporarily, use the toolbar in the email editor to select a font.
Whenever yahoo mail is not receiving emails on the phone or computer, you need to check the account settings. most probably, you have created a wrong filter or mailbox is full. If not so, do not worry, here are the guide to fix the problem.
Clear Mailbox Storage
1. Check your storage usage by logging into Yahoo Mail and scrolling to the bottom of your inbox.
2. Delete old or unnecessary emails, especially those with large attachments.
3. Empty the Trash and Spam folders to free up space.
2. Review and Adjust Email Filters
1. Go to Settings → Filters.
2. Review all active filters to ensure they are not redirecting emails incorrectly.
3. Edit or delete unnecessary filters and save the changes.
3. Unblock Senders
1. Navigate to Settings → Blocked Addresses.
2. Look for the sender’s email address in the block list.
3. If found, remove it and save the changes.
4. Check Spam and Other Folders
Sometimes, legitimate emails are mistakenly marked as spam:
1. Open the Spam folder and look for the missing emails.
2. Select legitimate emails and mark them as Not Spam to redirect future messages to your inbox.
5. Verify Email Forwarding Settings
1. Go to Settings → More Settings → Mailboxes.
2. Check if email forwarding is enabled.
3. If enabled and unnecessary, disable it to stop forwarding emails to another account.
6. Update or Switch Your Browser/App
1. If using the Yahoo Mail app, update it to the latest version via your device’s app store.
2. If accessing Yahoo Mail through a browser, use a supported browser like Chrome, Firefox, or Edge. Clear cache and cookies before logging in again.
7. Check Yahoo Mail Server Status
• Visit the Yahoo Mail Help Page or a third-party website like Downdetector to check if Yahoo’s servers are down.
• If there’s an outage, wait for Yahoo to resolve the issue.Whenever you are going through the wifi setup failed error on the Epson printer, you need to make the following changes into your router.
Verify Network Credentials
• Double-check the WiFi network name (SSID) and password.
• Ensure the WiFi credentials are entered correctly, keeping uppercase and lowercase letters in mind.
2. Place the Printer Close to the Router
• Ensure the printer is within the router’s range to receive a strong signal.
• Avoid placing the printer near devices like microwaves or cordless phones that may cause interference.
3. Use the Correct Network Frequency
• Most Epson printers work best with 2.4GHz networks.
• Log in to your router’s settings and check the network frequency. Switch to 2.4GHz if the printer doesn’t support 5GHz.
4. Restart Devices
• Restart your router and printer to refresh the connection.
• Power off both devices, wait for 30 seconds, and turn them back on.
5. Disable Firewall or Antivirus Temporarily
• Temporarily disable your computer’s firewall or antivirus software to rule out security blocks.
• Once the printer is connected, re-enable the security settings.
6. Update Printer Firmware and Drivers
• Visit the Epson Support Website and download the latest firmware and drivers for your printer model.
• Install the updates and restart the printer before attempting the WiFi setup again.
7. Reconfigure the WiFi Setup Using WPS
If your router supports WPS (WiFi Protected Setup):
1. Press the WPS button on your router.
2. On the printer, press and hold the WiFi button until the WiFi indicator starts flashing.
3. Wait for the connection to establish.
8. Use the Epson Smart Panel App
• Download the Epson Smart Panel app from your smartphone’s app store.
• Follow the on-screen instructions to configure the WiFi setupWhenever Epson printer is printing blank pages. There could be a problem with the computer or network. So here are the guide to fix the problem.
1. Low or Empty Ink Cartridges
One of the most common reasons for blank pages is insufficient ink. If the ink cartridges are empty or nearly empty, the printer cannot produce visible output.
2. Clogged Print Heads
Over time, the printer’s nozzles can become clogged with dried ink, preventing proper ink flow onto the paper.
3. Incorrect Printer Settings
Sometimes, wrong settings like printing in the wrong mode (e.g., draft or grayscale) can cause this issue.
4. Faulty or Incorrectly Installed Ink Cartridges
Improperly installed or incompatible ink cartridges can cause the printer to fail to transfer ink onto the paper.
5. Software or Driver Issues
Outdated or corrupt printer drivers can also lead to problems with printing blank pages.
6. Paper-Related Problems
Using incompatible or low-quality paper can sometimes interfere with the printing process.If you have changed the ip address but your router is still flashing orange. you need to perform mac cloning on your device.
- Open the netgear router admin panel. to do that, you need to go to the routerlogin.net. now enter your username and password and press sign in.
- Go to the internet section, and click on the LAN setup option
- Here, you need to scroll down to reach to the mac cloning option.
- Select use computer’s mac address.
- Now click on the apply changes button
That’s it, now your router will reboot itself, and then you will see a solid blue internet light on the netgear smart wifi router.
Whenever internet is not working on the netgear router and it keeps showing the flashing orange. you need to check the internet connection on the modem.
Make sure that you are getting the internet on your modem. you may follow the instructions given below to check the internet connection.
1. First of all, you need to check the Link or global light on the modem. it should be blue or flashing green. if it is orange or red. it means the internet is not working from the backend.
2. Let’s connect your computer to the LAN port of the modem via ethernet cable. now try to access the internet.If internet is working from the modem. it means there is an internet connection problem. so you need to talk to the ISp.
Meanwhile, if internet is working but you are still getting flashing orange light. you need to visit: How to fix netgear router internet not working?If you want to update the firmware on your netgear wireless router. you can follow this guide to troubleshoot the problem.
- First of all, you need to connect the router to the internet. so it can download the firmware from the cloud servers.
- Now connect your computer to the router.
- Once you will connect the computer to the router, you need to open the browser and go to the routerlogin.net
- Please enter your login credentials and then hit the sign in button.
- After logging into the router admin panel, you need to click on the advanced section.
- Go to the administration section, and then click on the Router update.
- Finally, you will see an option to firmware update, you need to click on the check for update.
- If, you see any firmware version available, click on the download and install
That’s it, your router will update the firmware now. In case, if you need more assistance, you may visit complete guide about : Netgear router firmware update
Generally, Lenovo laptop won’t turn on after bios update due to the following causes.
Corrupted BIOS Update: If the update process was interrupted (due to a power failure or error), the BIOS might be corrupted, preventing the laptop from booting.
Incorrect BIOS Version: Installing an incompatible BIOS version can cause hardware conflicts.
Incomplete Update: If the update didn’t finish properly, the system may not boot.
Power Issues: Low battery or a faulty power supply during the update can damage the system.If you are also going through same problem you should make the following changes into your laptop. it will start working fine on your device.
Perform a Hard Reset- Disconnect the laptop from the power adapter.
- Remove the battery (if removable).
- Hold the power button for 15-20 seconds to drain residual power.
- Reconnect the battery or power adapter and try turning it on.
- Use BIOS Recovery Mode
- Many Lenovo laptops have a BIOS recovery option:
Turn off the laptop.
Press and hold the Fn key + R or B (varies by model) while pressing the power button.
If successful, the BIOS recovery utility will appear, allowing you to restore or reinstall the BIOS.
Check External Connections
Disconnect all peripherals and external devices. A faulty connection might interfere with startup.Reset CMOS
- Resetting the CMOS can clear corrupted settings:
- Open the laptop and locate the CMOS battery.
- Remove it for a few minutes, then reinsert.
Seek Professional Help
If none of these steps work, your motherboard or BIOS chip may need repair or replacement. Contact Lenovo support or visit an authorized service center.Accessing your Netgear Smart WiFi router’s admin panel is very simple. Also it is useful when you need to help in managing settings like network security, parental controls, and firmware updates.
If you don’t know how to access netgear router admin panel. Do not worry, here are the guide that you can follow on your device.- 1. First of all, you need to connect the netgear router to the computer through wireless network. Also, if you don’t have wireless functionality, you can use the ethernet cable.
- 2. Now open the browser and type 192.169.1.1 in the top address bar and press the enter button.
- 3. Once, you will reach to the router login page, you need to enter the login credentials. By default, the username is Admin and password is password. Also, if this doesn’t work, you may look at the router. You will find the username and password written on it.
- 4. After entering the login credentials, you need to click on the login or ok button.
That’s it, you have now successfully logged into the netgear router admin panel, you may now make the changes into your account.
Creating folders in Yahoo Mail is an effective way to organize your inbox and manage your emails efficiently. Follow these steps to add a new folder to your Yahoo Mail account:
<h3>1. Log In to Your Yahoo Mail Account </h3>
- Open your web browser and go to the Yahoo Mail website.
- Enter your username and password to access your inbox.
<h3>2. Locate the Folders Section</h3>
In the left-hand menu of your inbox, you’ll see a section labeled Folders below Inbox and other default categories.
<h3>3. Create a New Folder</h3>
Hover over the Folders section. You’ll see a small plus sign (+) or an option to Create Folder.
Click the plus sign or the Create Folder button.
<h3>4. Name Your Folder</h3>
A text box will appear, prompting you to enter a name for the new folder.
Type the desired name (e.g., “Work Emails” or “Receipts”) and press Enter or click Save.
<h3>5. Start Using Your Folder</h3>
The newly created folder will now appear under the Folders section.
To move emails into the folder, simply drag and drop them from your inbox or select emails, click the Move button, and choose your folder.You can easily change the email signature on your yahoo mail account by following these steps.
- First of all, you need to open the web browser and go to the yahoo mail website.
- Now enter the email address and password in the login page and then click on the sign in button.
- Once you will logged into the yahoo mail account, you need to click on the gear icon in the upper-right corner of the screen. Now select More settings from the dropdown menu.
- Select writing email option from the left menu, and scroll to reach to the signature section.
- Choose the signature that you want to edit.
- Finally, you can make the changes into your email signature and then click on the save changes.
Once you will save the settings, your signature will be changed.
If you have blocked someone on yahoo mail account by mistake. Do not worry, you can easily unblock them from yahoo mail settings. Here are the steps to do that:
- First of all, you need to open the yahoo mail sign in helper page.
- Now enter your email address and password. Now press the sign in button. Once you will logged into the yahoo mail account, you need to wait until yahoo mailbox get’s loaded on the screen successfully.
- Let’s click on the settings icon available above the mailbox and then click on the more settings option.
- Now click on the Privacy and security option available in the left menu.
- Once you will get into the privacy and settings window, you will able to see the list of blocked address.
- Here, you need to delete the address that you want to unblock from the yahoo mail account.
That’s it, you have successfully unblocked the sender. Now if they will send you any email. It will appear on your mailbox.
Sometimes, audio devices are disabled in the system settings. Due to which, you see no audio output device installed error on your Lenovo thinkpad laptop. So you need to enabled the system settings.
- Right-click the Speaker icon in the taskbar and select Sound settings.
- Under Advanced, click More sound settings.
- In the Playback tab, right-click in the empty area and check Show Disabled Devices.
- If your audio device appears, right-click it and select Enable.
If this doesn’t work, check if recent Windows updates caused the issue. Roll back updates via Settings > Windows Update > Update history.
Connecting AirPods to a Lenovo laptop is straightforward if your laptop has Bluetooth capability. Follow these steps:
1. Enable Bluetooth on Your Laptop
- Press the Windows key + I to open Settings.
- Go to Devices > Bluetooth & other devices.
- Toggle Bluetooth to On. If you don’t see this option, check if your laptop has built-in Bluetooth. If not, you’ll need a Bluetooth adapter.
2. Put Your AirPods in Pairing Mode
- Place the AirPods in their charging case and open the lid.
- Press and hold the button on the back of the case until the LED light flashes white. This means the AirPods are in pairing mode.
- On your Lenovo laptop, click Add Bluetooth or other device.
- Select Bluetooth from the menu.
3. Pair AirPods with the Laptop
When your AirPods appear in the list of available devices, click on them to pair.
4. Test the Connection
Once paired, your AirPods will appear as an audio output device. Go to Settings > System > Sound to select your AirPods as the default audio device.
